Commercial Electrician Los Angeles — Fast, Code-Perfect, Business-Ready

Commercial services in Los Angeles — What we do 

Troubleshooting & repairs
Nuisance trips, dead circuits, hot outlets/switches, failed GFCI/AFCI, lighting outages. Most first-visit fixes wrap in 1–3 hours when access is clear. If the fault is complex, we stabilize service and schedule follow-up outside your open hours. (See our electrical services Los Angeles and electrical troubleshooting and repairs pages for details.)

Electrical panel upgrades

Running out of capacity or expanding? We handle load calcs, permits, utility coordination, meter/main changes, and labeled directories. Many electrical panel upgrades finish in a single day, with planned shutdowns typically under two hours.

Lighting (interior/exterior)

High-CRI LED retrofits, controls, emergency/egress, sign power, and outdoor lighting installation for lots and walkways. Dialed-in sensors cut waste without leaving dark corners.

EV readiness

Fleet charging or guest amenities—site surveys, load sharing, and conduit routing that plays nice with your future floor plan. We can phase EV charger installations so you start with 1–2 ports and scale.

Tenant improvements & small buildouts

Dedicated circuits for POS, server racks, kitchen gear, cubicle layouts, conference A/V, and receptacle-density upgrades—mapped cleanly to the new plan.

Preventive maintenance

Thermal scans, torque checks, breaker testing, cleaning, labeling, and annual reports that make inspections smooth and surprises rare.

Your first visit with us

1. Interview the site: symptoms, trading hours, equipment order, recent changes.
2. Safety sweep: panel heat/buzz, neutral/ground integrity, obvious hazards. If it’s unsafe, we make it safe first.
3. Targeted testing: voltage under load, circuit tracing, isolation testing as needed.
4. Stabilize & plan: repair on the spot when possible; otherwise a short-term safe workaround plus a clear proposal with options.
5. Closeout packet: photos, readings, code notes, and maintenance advice—so you can back decisions with your landlord, HOA, or insurer.

Industries we serve (and what usually breaks)

• Retail & showrooms: dimming lights (shared neutrals, aging ballasts), register/POS drops (overloaded quads).
• Offices: copier/printer islands tripping, daisy-chained cubicle circuits, noisy power feeding conference A/V.
• Restaurants & cafés: GFCI trips from heat/moisture, hood/ANSUL interlocks, refrigeration needing dedicated neutrals.
• Warehousing & light industrial: panel hot spots, forklift charger circuits, high-bay failures, missing lockout/tagout points.
• Multifamily common areas: garage lighting, gate/access power, EV readiness.

If any of that sounds familiar, you’re not alone—and yes, it’s fixable without wrecking your week.

Real-world case study — LA café group, three sites, one weekend

Problem: Random GFCI trips on prep lines and dim house lights during rush. Spoiled batches, cranky reviews.
What we found: Loose terminations at the panel, an overloaded multi-wire branch in the kitchen, and mixed lamp/driver types causing power-quality noise.
Plan: After-hours intervention across 48 hours.
Actions: Re-terminate and torque, split loads to a new homerun, standardize LED drivers, add surge protection, label circuits.
Result: Zero nuisance trips in 90 days, brighter aisles, and a 12% reduction in lighting energy. Doors stayed open—no daytime shutdowns.

A quick sensory snapshot: that kitchen went from the faint smell of overheated plastic and flickery, yellowish light to clean, cool panels and crisp, even brightness that actually made the pastries look better.